May 19, 2012, 08:50:45 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Custom Search
News
:
Home
Help
Search
Gallery
Login
Register
Ruff Stuff Specialties
NewEnglandJeepz.org
>
General Category
>
Builds
> Topic:
Dirty Tj
Pages: [
1
]
2
3
Go Down
« previous
next »
Print
Author
Topic: Dirty Tj (Read 1629 times)
0 Members and 1 Guest are viewing this topic.
Lumbuse
Official NEJ Member
Trade Count:
(
0
)
Offline
Posts: 372
Dirty Tj
«
on:
October 10, 2010, 12:27:06 AM »
OK, so I've been stockpiling parts for a couple of years, and now it's time to get to installing. When I bought my 03 Tj it came with Warn bumpers front and rear, and Warn 9.5 winch. I added a ruff cuntry 4 inch lift and a jks body lift about two years ago and some 33/12.5's.
Here's the list of parts in no particular order.
Tuffy stereo console. Thanks Jeff. Tuffy security drawer, thanks Tony, OK that's been installed for some time now but has to come out to do the bed liner. Two gallons of monster bed liner, I'm planning on spraying instead of rolling it. Cobra 29 ltd. A pair of ADS power amps. Hopefully going under one of the front seats. Used RE adjustable lower control arms (super flex), rear uppers (also super flex). Rokmen upper adjustable control arms. Rokmen tummy tuck skids engine and t-case. Rocktrac t case 4-1. Ian's axles 8.8 rear with 4.88s front 30 4.88s both with Arb's. Rusty's gas tank skid. 11/4" cromoly tie rod.
I may have forgotten some things and I'm sure I'll need some (lots) of misc. parts, but that's most of it. I put it in the garage the other night and got it all jacked up and on stands this morning. I need to clean up and repair some of the used parts, paint the axles and skid plates, but I'm on the way. I'll try to post some pics along the way. Feel free to offer suggestions or come over and help ( get away from your wife), drink beer etc.
Logged
"The early bird may get the worm, but the second mouse gets the cheese"
'03 Sahara, 4" suspension lift Rough country, JKS bl, JKS track bar, skid plates trans and steering box, Poison spider rockers, riding on 33/12.5 bfg's or truxs mt.
XJFever
Trade Count:
(
1
)
Guest
Offline
Posts: 1220
Re: Dirty Tj
«
Reply #1 on:
October 10, 2010, 01:01:08 AM »
pics?
Logged
yayyyy it has 4x4
Lumbuse
Official NEJ Member
Trade Count:
(
0
)
Offline
Posts: 372
Re: Dirty Tj
«
Reply #2 on:
October 10, 2010, 06:59:08 AM »
And I thought Big Daddie would be the first to post, go figure. I. Have a few I'll post some as soon as I figure out how. I think I ha e some from before I did the lift and tires.
Logged
"The early bird may get the worm, but the second mouse gets the cheese"
'03 Sahara, 4" suspension lift Rough country, JKS bl, JKS track bar, skid plates trans and steering box, Poison spider rockers, riding on 33/12.5 bfg's or truxs mt.
jps4jeep
Club Officer
Trade Count:
(
1
)
Online
Posts: 10407
Average at best
Re: Dirty Tj
«
Reply #3 on:
October 10, 2010, 10:43:08 AM »
and saw blade rims!
Logged
To error is to be human; to error and blame it on someone else, that managerial potential.
Lumbuse
Official NEJ Member
Trade Count:
(
0
)
Offline
Posts: 372
Re: Dirty Tj
«
Reply #4 on:
November 09, 2010, 09:59:13 AM »
Ya, I know no pics, but thanks to Ian for comming over last night and helping. We had a few drinks and still managed to get the front axle out. Next the rear and the skids.
Logged
"The early bird may get the worm, but the second mouse gets the cheese"
'03 Sahara, 4" suspension lift Rough country, JKS bl, JKS track bar, skid plates trans and steering box, Poison spider rockers, riding on 33/12.5 bfg's or truxs mt.
Twisty
Club Officer
Trade Count:
(
0
)
Online
Posts: 9589
iFab, and you can too!
Re: Dirty Tj
«
Reply #5 on:
November 09, 2010, 10:44:44 AM »
Glad to hear you're making progress, Paul!!
Logged
88 MJ buggy, 4.0/AW4, 203/205, 3 link front/4 link rear on airshocks, 42" Iroks, full hydro
Lumbuse
Official NEJ Member
Trade Count:
(
0
)
Offline
Posts: 372
Re: Dirty Tj
«
Reply #6 on:
February 14, 2011, 10:00:07 AM »
Game on for Saturday. The goal is to Finnish ripping the axles out and then move on to the t-case. If that goes well I need to see why the auto tranny is leaking, i'm hoping it's just the gasket. Then start the reassembly using some new parts. 4-1 rocktrac, Rock men tummy tuck, some new to me control arms, and some used axles from under Ian's rig. I'll be happy to get to the point where the axles can go in as they need some cleaning and painting.
I believe Ian, and Tim are in for the assist and I have one case each of Corona and Sam Adams to help lube the effort. Anyone else?
I almost forgot I have heat, cold beer, and lots of heat in the garage!
Logged
"The early bird may get the worm, but the second mouse gets the cheese"
'03 Sahara, 4" suspension lift Rough country, JKS bl, JKS track bar, skid plates trans and steering box, Poison spider rockers, riding on 33/12.5 bfg's or truxs mt.
Axle
Club Officer
Trade Count:
(
0
)
Offline
Posts: 11001
Re: Dirty Tj
«
Reply #7 on:
February 14, 2011, 10:18:42 AM »
where do you live?
Logged
82 cj-7
Ian
Club Officer
Trade Count:
(
2
)
Online
Posts: 7079
slow ride, take it easy
Re: Dirty Tj
«
Reply #8 on:
February 14, 2011, 10:25:36 AM »
Quote from: Axle on February 14, 2011, 10:18:42 AM
where do you live?
he lives 10 mintues from me.... so 2 hours + from you
Logged
i am an AMSOIL dealer! pm me for a quote
60 w/ minor bling 4.56, 14b ff rear w/detriot 4.56, atlas 2speed 5.0 4 custom link rear and 3link front, 110" wheelbase, pcs full hydro, fox 2.5's, and 42" Irok stikies... and no clue
'00 tj (see above)
'95 Cherokee
'82 Cherokee
'83 wagoneer (rusted out parts vehicle
Tooch
Official NEJ Member
Trade Count:
(
0
)
Offline
Posts: 5139
I know Karate, Kung-Fu + 47 other dangerous words!
Re: Dirty Tj
«
Reply #9 on:
February 14, 2011, 12:06:15 PM »
How did this go?
Logged
Lumbuse
Official NEJ Member
Trade Count:
(
0
)
Offline
Posts: 372
Re: Dirty Tj
«
Reply #10 on:
February 14, 2011, 01:00:01 PM »
This comming Sat. Are you thirsty?
Logged
"The early bird may get the worm, but the second mouse gets the cheese"
'03 Sahara, 4" suspension lift Rough country, JKS bl, JKS track bar, skid plates trans and steering box, Poison spider rockers, riding on 33/12.5 bfg's or truxs mt.
Ian
Club Officer
Trade Count:
(
2
)
Online
Posts: 7079
slow ride, take it easy
Re: Dirty Tj
«
Reply #11 on:
February 14, 2011, 01:41:16 PM »
Quote from: Lumbuse on February 14, 2011, 01:00:01 PM
This comming Sat. Are you thirsty?
in the evening?
Logged
i am an AMSOIL dealer! pm me for a quote
60 w/ minor bling 4.56, 14b ff rear w/detriot 4.56, atlas 2speed 5.0 4 custom link rear and 3link front, 110" wheelbase, pcs full hydro, fox 2.5's, and 42" Irok stikies... and no clue
'00 tj (see above)
'95 Cherokee
'82 Cherokee
'83 wagoneer (rusted out parts vehicle
Tooch
Official NEJ Member
Trade Count:
(
0
)
Offline
Posts: 5139
I know Karate, Kung-Fu + 47 other dangerous words!
Re: Dirty Tj
«
Reply #12 on:
February 14, 2011, 03:47:57 PM »
Oh...I was off a week. If I'm not helping my brother move, I'll swing by and give you a hand. I should know later this week if he's packing or not this weekend.
Logged
Twisty
Club Officer
Trade Count:
(
0
)
Online
Posts: 9589
iFab, and you can too!
Re: Dirty Tj
«
Reply #13 on:
February 14, 2011, 05:14:42 PM »
I will be there, Paul.
Logged
88 MJ buggy, 4.0/AW4, 203/205, 3 link front/4 link rear on airshocks, 42" Iroks, full hydro
j-dawg
Club Officer
Trade Count:
(
0
)
Offline
Posts: 1509
Re: Dirty Tj
«
Reply #14 on:
February 14, 2011, 08:39:10 PM »
that sucks paul, that is my birthday and wifey made plans...
depending on when we get done i may swing by later...
Logged
Ballistic Fabrication
Pages: [
1
]
2
3
Go Up
Print
NewEnglandJeepz.org
>
General Category
>
Builds
> Topic:
Dirty Tj
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General Category
-----------------------------
=> General Discussion
=> Technical Discussion
=> Builds
=> Photo Gallery
=> Public Events
=> Land Use
-----------------------------
Vendors
-----------------------------
=> Public Vendor Section
-----------------------------
Marketplace
-----------------------------
=> For Sale
=> Free Stuff
=> Wanted
=> Product Review
Ballistic Fabrication
Loading...
